How to DIY your sweet phone shells (Part II) /自制干花手机壳教程

Hey, dear Steemians, now the next part of making sweet phone shells is coming.

亲爱的Steemians, 制作自制手机壳的第二部分开始啦。

How to make the phone shell made of various dried flowers 

如何制作各式各样的干花手机壳

• Materials    准备材料

1. glue A and B( something like curing agents in epoxy) AB胶（环氧树脂固化剂）
2. a fixing glue                                                                        固定胶
3. a pair of tweezers                                                              一副镊子
4. a  muddler                                                                          一根搅拌棒
5. a  measuring cup                                                               一个量杯
6. an injector with needle                                                     一个注射器
7. artificial powdered gold                                                    金粉
8. a transparent phone shell                                                 一个透明手机壳

As you can see from the picture below, all the materials can be bought on the Internet.

正如下图片显示的，所有材料均可在网上购买。

• Production process   制作流程

1. Mix Glue A with B. 

The proportion is 3:1. That is to say if you give 30 percent of Glue A , then  you should put 10 percent of Glue B in the measuring cup. The needle is to help you to get some glue. Use the muddler to mix them. 

    将A和B胶混合，他们的比例是3:1. 用注射针头来取部分胶水（以免弄脏手指），再用木棒在量杯里进行搅拌。 

2. Remember to clean the surface of the transparent phone shell. 

   记得将透明手机壳表面擦拭干净。

3. Stick the dried flowers on the shell by using the fixing glue.

You can design or decorate them through you own imagination.  If you want to make it more delicate, you're expected to put the petal of leaf on it one by one.

用固定胶将干花粘在手机壳表面，你可以自己设计喜欢的样式。如果你想做得精美一些，最好将花瓣和叶子一片片地放上去。

4. Pave the glue A and B which has been mixed on the phone shell.

This time,  make sure you'd kept the air out of the shell.

将混合好后的AB胶平铺在手机壳上，最关键的一点是要注意隔绝空气，不能留任何气泡。

5. Lay the shell on the ground for at least 6 hours to let it dry.

静置于平地上至少6小时，让手机壳风干。

Above are the steps of making dried flower phone shell.

以上就是干花手机壳的制作步骤。

Following are some finished products. 

下面是我做的一些成品手机壳。

When you have mastered how to make it, you can make more of them to present your family or friends. 

当你已经掌握了如何制作之后，你可以制作更多送家人或朋友。

Like this:

By the way, the process of making key chains is the same as making phone shells. You just need to buy some moulds on the Interent. 

制作干花钥匙扣同手机壳过程一样，只需要在网上买好模具即可。

If you like my sharing, please upvote! Many thanks >3 

 如果喜欢我的分享，请点赞。非常感谢！

If you want to follow, please click（点击） @mrpointp 

My other relevant posts（我的其他相关帖子）:

 Mrpointp's Leisure Time #1：DIY the phone shells and key chains---自制(卡通和干花）手机壳 钥匙扣

Mrpointp's Leisure Time #2：How to DIY your sweet phone shells (Part I) ---自制仿真奶油卡通手机壳教程