Aquaponics Mini hybrid garden system NFT/EBB and Flow!

Hey everyone. It has been a while since I have made an aquaponics post so here goes.

This was a small unit I made to test a hybrid system I had in mind.. It wasn't the biggest system but it really did work a dream . I always recommend starting small while learning the ins and outs of aquaponics.

10436695_308953559288180_9081372808349752952_n.jpg

I used a 110 mm PVC pipe sun treated this is very important as the sun can be very aggressive on plastics that are not treated. I used a 76 mm hole saw to drill the holes for the baskets and placed them in this configuration to grow strawberries (which do very well in aquaponics) Sadly though my positioning of the system wasn't conducive as there was just not enough sun and too many tree's for strawberries.

10349080_308952862621583_3226205488369596296_n.jpg

Here I had a bell and siphon system with automatically drained the water once full. I used a specially engineered folding stand my initial idea was to make these units in volume so they they could be shipped all over with ease, however the cost of a custom aluminum stand was just not cost effective..

11855838_432175563632645_2214085114816690042_n.jpg

If you are keen to get involved with aquaponics and have any questions on how to decide on which system or plant of fish to use do comment below and I will gladly assist. I used gold fish in this system as they are very resilient to temperature fluctuations on both ends of the spectrum.

Here I was doing further experimentation in the gravel with Rhubard and a few herbs which worked very well. The baskets were yet to be planted.

10628128_308952919288244_6444295223261772219_n.jpg

Cheer$:)

H2
H3
H4
3 columns
2 columns
1 column
6 Comments