Today we made a foundation mold for casting the girder beams.

good afternoon friends, how are you all, I hope you are all in good health and always successful, and on this afternoon's occasion, come back with me and I will share as usual, namely about the development that I am working on, which is my story in the last few days. maybe it's about what I'm going through that I can share on the stemm platform, because I'm a little busy now in work activities according to my wishes, and even though my expenses are difficult, I'm still enthusiastic about living this extraordinary life, and I will upload some the atmosphere at the place of work that we are working on, and we hope you like it.

Today's story is about making a mold for a building with a pair of taluts, the aim of which is to cast the top beam of a pair of taluts, so before we cast, we first have to make a mold or mall, which takes about 7 hours, from 8 am to 3 pm. , we made this mall mold, because making mall molds requires really focus and concentration in installing it, and we made this mall mold on a pair of taluts which has a height of around 2.30cm, the height of the talut pair, and the length of the talut pair is medium We have worked on this for around 80 meters, and now it is almost finished, we only need to cast the top beam to maintain the talut pair, it is different to make the talut pair from the previous one, and friends, as usual, you can see in the picture that I have photographed on the part of the mall mold that has been made. we made about 40 meters, there are only a few meters left that we haven't installed the mald.

and making molds for the top beams of talut pairs is really difficult and has to be resistant, it is different from making foundation molds, because making molds for the top beams has to be done by using long pieces of wood to support the mold so that it doesn't collapse when it is cast, and it has to be really strong. really hold on, because this is at the top of the talut pair, or in our language the top beam, maybe friends are familiar with seeing the mold of the talut pair that we are making, because friends definitely already know more about this construction structure, because where are we? Just make sure there are a couple of gutters made on the side of the road to keep the ground from collapsing, etc

I do selvi enthusiastically to show myself to my Steem friends, which I haven't shown myself for a long time, in every post I make at the location where I work, but today I am really enthusiastic about sharing my activities, while waiting cement carrying car, to cast the blocks which were ready for us to make molds, and I did this selvi when I was ready to make the top block foundation mold, because I was also very tired and the sun was also very hot, which made my skin even blacker , but I don't think about that, if I'm focused on looking for sustenance, wherever I am, stay enthusiastic.

a few hours after we finished making the foundation mold for the talut pair blocks, and we immediately called someone in the warehouse to bring cement mortar to cast the foundation for the top beam, using a truck, and we also helped with the pouring so that it was finished quickly, and friends could see for yourself in the picture that I have photographed, when we were casting the foundation blocks, that's my story today, making a mold to cast the top foundation on the talut pair, which has spent 18 days at this location, all that remains is to remove the mold, thank you , I hope you like my story today, thank you.