Doing science in a developing country: my 2 month internship in Malaysia

In North America and western Europe we are a bit snobbish about science. Everything has to be done with rigour and precision or it's not real science.
cartoon-1300661_640.png

We can afford to think that way because we have enough money for fancy, expensive machines, lab technicians, IT departments, and regular maintenance and safety inspections.

Not every country can afford those things.

Malaysia is not a third-world country, but they are not exactly drowning in riches either. To be honest, I was impressed with the labs at the university I stayed at. They were clean, well organized, and for the most part had appropriate safety procedures in place. The rooms were spacious and the equipment looked to be of reasonable quality and well-looked-after.

All was not quite as it seemed.

You see, to afford such fancy machines a number of corners had to be cut. For example, although everyone did their best to avoid breaking the machines, there was no one to fix them when something did go wrong.
spangdahlem-air-base-81169_640.jpg
There seems to be a shortage of these guys at Malaysian universities.

Part of the practical work of my project involved using a spectrophotometer connected to a computer. The machine worked fine, but there was one problem. I was told that it was a bad idea to copy my data from the computer to my laptop because the computer had a virus. Instead of paying someone to get rid of the virus, the procedure was to take pictures of the data on the screen and then copy it manually!

My experiment took place in a freshwater aquaculture facility. Actually it was a marine aquaculture facility, but the seawater input system wasn't working, so it had become a freshwater aquaculture facility instead. We used anti-chlorine tablets to remove the chlorine from the water. These tablets were stored in a small jar shared by the whole facility, and the jar had a habit of disappearing. This left everyone unable to dechlorinate their fish tanks until it was relocated, or someone was found that knew where additional tablets were stored. The fish were not happy about this situation, but most of them survived.

I ran into a few problems when trying to run my experiment. 955 (Custom).JPG

Problem #1: My experiment required heating a 400 liter tank of water to specific temperatures. All the aquarium heaters at the facility had European-style 2-pin power plugs. Malaysia does not have European-style outlets. It has UK-style outlets that require 3 pins on the plugs. You cannot plug something with 2 pins into these 3 pin sockets because the holes don't open properly unless you press all 3 pins in at once.
231px-BritishPlugforWikipedia.jpg
320px-Euro-Flachstecker_2.jpg

Most of us might consider that there is an easy solution to this: just buy a few adapters! Instead, they had come up with a more inventive solution. Press something else into the third hole temporarily while you push the 2-pin plug into the socket. This was by no means an easy thing to do, and I don't recommend that you try it at home, but it usually worked after a bit of fiddling around.

Problem #2: the aquarium heaters were apparently broken, and didn't actually heat the water. This was solved by another inventive solution. Fill a 1 liter electric kettle with water from the tank. Plug it in until it boils. Dump the hot water back into the tank and fill the kettle again. You might guess that it takes quite a few kettle loads to heat the water by a few degrees, and you would be correct. It was tedious and time-consuming. But it worked.
193px-Electric_kettle_phillips_white.JPG

Well, it mostly worked, anyway. There was one tiny problem with the kettle. The automatic shut off didn't work, so if you left it to heat up and went off to take care of other important things, and returned just a teensy bit too late, the water started boiling all over the place and the kettle got overheated and stopped working for a while. Experiment days were long days...

Problem #3: I needed the use of a dissolved oxygen meter.
waterproof-portable-dissolved-oxygen-and-bod-meter-hi98193.jpg
Image from Hanna Instruments.

There seemed to be only one at the university that was considered accurate (personally I might have used the term 'piece of shit' rather than 'accurate', but in fairness it displayed numbers on the screen which occasionally stopped changing for a second or two) and that was in use for another experiment at the actual freshwater aquaculture facility about 1 km away.

At this point I should mention my student helper Adi (not his real name). Thank God for Adi. Wonderful Adi. He didn't always show up on time, or at all, and halfway through the project he got a job in another city and immediately abandoned me. But thank God for Adi because Adi knew how to navigate the system and get things done. I would have been lost without Adi. When he left I managed, but by then I had learned a thing or two.

This problem was solved by a sharing system. When we needed the DO meter, Adi would make a call on his phone, then take off on his motorbike to the other facility 1 km away, and return 45 minutes later with the meter (don't blame him, things happen slower in Malaysia). Then I would take the meter, dip the probe into the water, and curse and struggle and pray that the damned thing would achieve a stable reading at some point instead of jumping up and down like an angry 2 year old that can't find his favourite toy.

Then at some point Adi would receive a phone call and I would rush through the rest of my measurements, skeptically writing down the first number that paused for a second in its madly undulating journey. When I finished, Adi would take the meter back to the other group on his motorbike and return 45 minutes later. I'd have been lost without Adi.

Problem #4: I needed to perform unfamiliar chemistry techniques, but there were no technicians around to teach me the methods. Solution: Adi and I figured it out ourselves. But first we had to obtain a substance that we didn't have in our lab, which was produced from two other chemicals. So we went off to raid the chemistry department.

We knew nothing about these ingredients except the names. Unimportant details like how deadly toxic their fumes might be were unknown to us. I was quite befuddled, wondering if maybe we should check out the safety information or at least find a fume hood.
320px-Fume_hood.jpg

Silly me. Adi took take care of it by opening the bottles and mixing the chemicals together in the open air of the lab, with no gloves, no mask, and no lab coat. Adi is going to live a long and healthy life.

But we managed. We made everything work. I got my project done. You see, the thing about Malaysian scientists is that they have all the essential ingredients of scientists. They are curious about the world around them, they work hard and they want to learn and find answers.

There are some equipment and personnel limitations, and there is not the same standard of rigour that you find in western developed countries. But they do their best. They still do science. They still publish in peer reviewed journals. And they still make progress and contribute to the scientific literature. Best of all, they are creative. They have to be.




Other articles by me:

Enormous spider eats a live caterpillar: night time in the Malaysian jungle

Two months in the Islamic heart of Malaysia

Empathy workshop, part 1: Why the world needs more empathy

Empathy workshop, part 2: How to increase your empathy

Empathy workshop, part 3: Getting better at understanding people you dislike or disagree with

Empathy workshop, part 4: Putting your empathy into action

Intolerance is fear of the unknown

The old man on the bench (a flash fiction story)



If you enjoyed this article, don't forget to comment, upvote and follow me!

H2
H3
H4
3 columns
2 columns
1 column
25 Comments